Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #33

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Pry in the hole ofup the logic board at the lower edge of the rectangular gap, near the EMI shield.
[* blackicon_caution] Lift the end of the logic board slowly, ifslowly. If you encounter significant resistance, stop prying and reapply the iOpener.
[* black] Pry in the hole ofup the logic board at the lower edge of the rectangular gap, near the EMI shield.
[* blackicon_caution] Lift the end of the logic board slowly, ifslowly. If you encounter significant resistance, stop prying and reapply the iOpener.