Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #32

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert a plastic opening tool in the holerectangular gap in the upper area of the logic boardboard, and pry itthe logic board up from the rear case.
[* black] SlideWhile keeping the opening tool underneath the logic board, slide it down the length of the inner channelgap to free the upper end of the logic board from the adhesive.
[* black] Insert a plastic opening tool in the holerectangular gap in the upper area of the logic boardboard, and pry itthe logic board up from the rear case.
[* black] SlideWhile keeping the opening tool underneath the logic board, slide it down the length of the inner channelgap to free the upper end of the logic board from the adhesive.