Ir para o conteúdo principal

Alterações no passo #24

Edição por Evan Noronha

Edição aprovada de Evan Noronha

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gently to see if the adhesive is softened. If not, reheat the iOpener and reapply it to the back of the rear case.
[* black] Carefully insert a guitaran opening pick under the logic board, between the front-facing camera and the battery.
[* black] Slide the guitar pick toward the front-facing camera connector, and stop at the bend in the logic board.
[* black] Carefully insert a guitaran opening pick under the logic board, between the front-facing camera and the battery.
[* black] Slide the guitar pick toward the front-facing camera connector, and stop at the bend in the logic board.