Menu

Suas configurações

Alterações no passo #4

Edição por Paige Reisman —

Edição aprovada de Paige Reisman

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Lay the scanner face up so you can access the under side, and place something, such as a piece of Styrofoam, underneath of it so that the white tape does not become detached.
[* red] Locate the four 3mm Phillips #0#2 screws along the edge, and remove all of them.
[* red] Locate the four 3mm Phillips #0#2 screws along the edge, and remove all of them.
[* icon_note] Store the screws in a safe place where you can access them later.