Ir para o conteúdo principal

Alterações no passo #15

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Close up the case ! You're done
-[* black] I had some issues getting it to clamp back properly - check the part of the case with the groove on the edge for any left over pieces of plastic, and try your best to get them out
-[* black] You can glue the case back together, or, in my case, since I had none, I used clear duct tape to stick it back together
-[* icon_note] Make sure you take good care of the wire from now on - make sure it doesn't get bent when you carry it around :)
+[* black] Close up the case! You're done.
+[* black] I had some issues getting it to clamp back properlycheck the part of the case with the groove on the edge for any left over pieces of plastic, and try your best to get them out.
+[* black] You can glue the case back together, or, in my case, since I had none, I used clear duct tape to stick it back together.
+[* icon_note] Make sure you take good care of the wire from now on; make sure it doesn't get bent when you carry it around. :)