Ir para o conteúdo principal

Alterações no passo #12

Edição por Darie H

Edição aprovada por Darie H

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Thread the rubber/plastic stopper back onto the wires
+[* icon_caution] Do this AFTER you have applied solder to the tips of the wires
+[* black] To do this, I sprayed a bit of alcohol on the whole thing, and pulled the wires with the pliers; it required a pretty decent amount of force - but don't worry, the cables should hold without a problem - just make sure you're pulling both at the same time
+[* red] Note that I've also added a tiny length of shrink-tube on the exposed wire

Imagem 1

Nenhuma imagem anterior

Adicionado