Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #3

Edição por Ryan

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] To putinstall a new drive indrive, make sure the board is face up so that the circuit and barcode are visible.
[* black] To putinstall a new drive indrive, make sure the board is face up so that the circuit and barcode are visible.
[* black] Slide the board into the slot and push down so that the board clicks in place, making sure the board is pushed ALL the way in.
[* black] Now reattatch the black wire under the laberlabel "AUX" and the white under the label "Main". Clip the wires back on as though clipping in pins.
[* black] Now reattatch the black wire under the laberlabel "AUX" and the white under the label "Main". Clip the wires back on as though clipping in pins.