Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #3

Edição por Richdave

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] To install a new drive, make sureLift the board is face up so that the circuit and barcode are visible.
[* black] Slide the board into
out of the mini PCI slot and push down so that the board clicks in place, making sure the board is pushed ALL the way in.
[* black] Now reattatch the black wire under the label "AUX" and the white under the label "Main". Clip the wires back on as though clipping in pins.
at an angle of about 35 - 45 degrees
[* black] To install a new drive, make sureLift the board is face up so that the circuit and barcode are visible.
[* black] Slide the board into
out of the mini PCI slot and push down so that the board clicks in place, making sure the board is pushed ALL the way in.
[* black] Now reattatch the black wire under the label "AUX" and the white under the label "Main". Clip the wires back on as though clipping in pins.
at an angle of about 35 - 45 degrees

Imagem 2

Excluído

Imagem 3

Excluído