Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por Richdave

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Onceyellow] Using a plastic spudger or similar, gently pry the panel has been taken off, find two clips on either side ofgrey and black wires off. These are the board about halfway from the top.antenna wires so be careful not to damage them
[* black] Placing your thumb on each clip,red] Gently pull the retaining clips away from the board so that the board pops up.
[* icon_caution] Caution: Do not pull on the board as it has two wires attatched to it.
[* black] To detach the two wires from the board, gently wiggle them back and forth until they come loose.
[* red] Onceyellow] Using a plastic spudger or similar, gently pry the panel has been taken off, find two clips on either side ofgrey and black wires off. These are the board about halfway from the top.antenna wires so be careful not to damage them
[* black] Placing your thumb on each clip,red] Gently pull the retaining clips away from the board so that the board pops up.
[* icon_caution] Caution: Do not pull on the board as it has two wires attatched to it.
[* black] To detach the two wires from the board, gently wiggle them back and forth until they come loose.

Imagem 1

Versão Antiga

Nova Versão

Imagem 3

Excluído