Ir para o conteúdo principal

Alterações no passo #11

Edição por Walter Galan

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the flat end of a spudger to disconnect both antenna connectors from the antenna board.
-[* icon_note] The gray antenna attaches near the corner of the antenna board.
-[* icon_note] The rear bezel can now be completely removed from the LCD assembly.
+[* icon_reminder] The gray antenna attaches near the corner of the antenna board.
+[* black] The rear bezel can now be completely removed from the LCD assembly.