Ir para o conteúdo principal

Alterações no passo #3

Edição por Andrew Bookholt

Aguardando aprovação

Sem alteração

Linhas de Passo

+[* icon_caution] The next few steps require the use of iPod opening tools and spudgers that will probably be destroyed in the process. Have a few spares of each tool handy.
[* black] Insert an iPod opening tool between the left edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the tabs on the front display bezel.
[* black] Work along the left edge of the display until the rear bezel is evenly separated from the front bezel.
[* icon_note] Freeing these tabs may require some force. Be sure to support the display assembly with your other hand to avoid putting too much strain on the hinges.