Ir para o conteúdo principal

Alterações no passo #1

Edição por Walter Galan

Aguardando aprovação

Sem alteração

Linhas de Passo

+[* icon_note] The following procedure allows the changing of the rear display bezel without removing the display assembly from the computer. Do not attempt to rotate the display back farther than the hinges allow or your computer may be damaged.
+[* black] Open the computer with the display facing you and rotate the display back as far as possible.
+[* red] Remove the T6 Torx screw from the bottom left corner of the display assembly. The computer casing will not allow the screwdriver to be inserted directly into the screw, so be careful not to strip the screw.

Imagem 1

Nenhuma imagem anterior