Pular para o conteúdo principal

Alterações no passo #5

Edição por Tim

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use your thumbs to slide the RJ-11 boardtelephone jack away from the sound card in the same direction you would disconnect aif you were disconnecting the phone cable. The jack has two slots that cup the board so make sure that when you apply pressure to remove from the board you are pushing parallel to the board.
[* black]
This is your chance to get out some aggression, as the boardjack will most likely be very tight and requires a good deal of force to remove. Don't get carried away though - don't hold onto the power connector and don't put too much actual force on the card itself.
[* black] Use your thumbs to slide the RJ-11 boardtelephone jack away from the sound card in the same direction you would disconnect aif you were disconnecting the phone cable. The jack has two slots that cup the board so make sure that when you apply pressure to remove from the board you are pushing parallel to the board.
[* black]
This is your chance to get out some aggression, as the boardjack will most likely be very tight and requires a good deal of force to remove. Don't get carried away though - don't hold onto the power connector and don't put too much actual force on the card itself.