Pular para o conteúdo principal

Alterações no passo #8

Edição por Evan Perez

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackgreen] Touch the soldering iron tip to the solder in the upper right corner connecting the logic board to the battery lead.
[* blackgreen] Touch the soldering iron tip to the solder in the upper right corner connecting the logic board to the battery lead.
[* black] Pull the battery lead out of the slot in the logic board. This must be done immeadiately after the solder melts.
[* blackblue] Repeat for the solder to the left.
[* blackblue] Repeat for the solder to the left.
[* black] The logic board will now be completely free from the camera.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado