Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por iRobot

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] There should be no cables connected to the top of the logic board at this point.
[* black] Remove the following 12 Phillips screws from the logic board:
[* red] Six 4 mm around the edges of the logic board.
[* orange] Two 5 mm securing the right speaker to the logic board (move the speaker off of the logic board).
[* yellow] Three 6 mm with wavy washers in the upper, left corner of the logic board.
[* green] One 4 mm underneath a black bumper in the back right corner of the logic board.
[* blue] One 4 mm screw may not be present on some logic boards.

Imagem 1

Nenhuma imagem anterior

Adicionado