Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #4

Edição por Marty

Edição aprovada de Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert wisdom hereWith needle nose pliers, gently bend back metal tab at bottom of click wheel PCB so you can release this board from upper metal tab. Fold away to the right and slide apart the ribbon cable from this board, place aside. Then lift LCD display away from camera and again carefully remove TWO ribbon cables (boxed in blue) and place aside.
[* black] Insert wisdom hereWith needle nose pliers, gently bend back metal tab at bottom of click wheel PCB so you can release this board from upper metal tab. Fold away to the right and slide apart the ribbon cable from this board, place aside. Then lift LCD display away from camera and again carefully remove TWO ribbon cables (boxed in blue) and place aside.