Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #4

Edição por Angela Pitts

Edição aprovada de Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] With needle nose pliers, gently bend back the metal tab at the bottom of the click wheel PCB so that you can release this board from the upper metal tab. Fold it away to the right and slide apart the ribbon cable from this board,board and place aside.
[* black]
Then lift the LCD display away from the camera and again carefully remove TWOtwo ribbon cables (boxed in blue) and place aside.
[* black] With needle nose pliers, gently bend back the metal tab at the bottom of the click wheel PCB so that you can release this board from the upper metal tab. Fold it away to the right and slide apart the ribbon cable from this board,board and place aside.
[* black]
Then lift the LCD display away from the camera and again carefully remove TWOtwo ribbon cables (boxed in blue) and place aside.