Pular para o conteúdo principal

Alterações no passo #11

Edição por Davin

Edição aprovada por Davin

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Once you have lifted the panel up enough on the right side, you can insert your fingers or a spudger between the top and bottom panels.
[* black] Then gently move your fingers or spudger along the bottom and sides of the laptop, loosening the panels even more until it comes completely loose.
[* black] Once the top panel is completely loose from the bottom of the laptop, removelift it apart from the bottom of the laptop.
[* black] Lift
the top panel and setup slightly so that the mousepad wire is visible. Unplug the mousepad wire from the bottom asideof the laptop.
[* black] Once the top panel is completely loose from the bottom of the laptop, removelift it apart from the bottom of the laptop.
[* black] Lift
the top panel and setup slightly so that the mousepad wire is visible. Unplug the mousepad wire from the bottom asideof the laptop.

Imagem 2

Versão Antiga

Nova Versão