Alterações no passo #4
Edição por Nicolas Siemsen —
Edição aprovada por Nicolas Siemsen
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] Inspect the bolt. On the newer style, as pictured, there are two different sizes of o-rings to seal the bolt. One the earlier style, there is only one o-ring. |
| [* red] On this bolt, the o-rings are old, brittle, and flattened. They need to be replaced, there are o-rings in most metric o-ring kits that will fit. |
| [* black] On the early style housing there is also a copper crush washer that goes under the head of the bolt, in place of the second o-ring. This should be replaced with every filter change. |
| [* green] See the new o-rings installed here. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado