Alterações no passo nº 4
Edição por Emily Holland —
Edição aprovada por Emily Holland
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] With the plastic opening tool, firmly pry the motherboard up out of the phone case. Pry at the section in between the two slots that you just took the front and back cameras out of. |
|---|---|
| - | [* black] Firmly lift up at the section where the silver part of the motherboard comes to the edge of the green base board. |
| + | [* black] With the plastic opening tool, firmly pry the motherboard up out of the phone case. Pry from the right side of the motherboard where the back camera was previously located. |
| + | [* black] Firmly lift the section up where the silver part of the motherboard comes to the edge of the green base board. |
| + | [* icon_note] The motherboard has a lot of adhesive connecting it to the phone, so it will require some force to remove it. |