Alterações no passo nº 5
Edição por 20thme —
Edição recusada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] If you are reattaching the same shield plate to a new display, there is no need to peel the cable assembly off the LCD shield plate. Skip this step. | |
| [* black] Carefully peel the cable assembly off of the LCD shield plate to remove it from the display. | |
| + | [* black] Carefully unfold the old cable assembly, and peel the shield plate off the back of the front-facing camera. Reinstall same shield onto new cable assembly, or install new shield in the same orientation as the old one. |
| [* icon_caution] Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable. |