Alterações no passo nº 2
Edição por 20thme —
Edição recusada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Using the edge of a set of tweezers or a metal spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below. | |
| - | [* icon_caution] ***Only pry directly under the earpiece speaker contacts***—there are sensors and microchips that can be damaged by prying elsewhere. |
| + | [* icon_caution] ***Only pry directly under the earpiece speaker contacts***—there are sensors and microchips that can be damaged by prying elsewhere. This piece is paper-thin that must be pried up. The opening below the speaker contact cable should NOT be pried on. |