Ir para o conteúdo principal

Alterações no passo #2

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] 用镊子把粘在屏幕上的排线轻轻撬起。Using the edge of a set of tweezers or a metal spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below.
[* icon_caution] 注意,只要撬金属触点的下方位置,否则的话你很可能会屏幕。'''Only pry directly under the earpiece speaker contacts'''—there are sensors and microchips that can be damaged by prying elsewhere.
[* black] 用镊子把粘在屏幕上的排线轻轻撬起。Using the edge of a set of tweezers or a metal spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below.
[* icon_caution] 注意,只要撬金属触点的下方位置,否则的话你很可能会屏幕。'''Only pry directly under the earpiece speaker contacts'''—there are sensors and microchips that can be damaged by prying elsewhere.