Alterações no passo nº 1
Edição por Sam Goldheart —
Edição aprovada por Sam Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Unscrew the single captive Phillips #000 screw securing the home button cable. | |
| [* icon_reminder] The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD. | |
| + | [* icon_reminder] If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable. |