Pular para o conteúdo principal

Alterações neste passo

Edição por sage

Edição aprovada por sage

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] This step is two part and will permanently break a part of the handle. By prying the play back it will be softened and wont hold as tight when put back. Consider glueing when reassembling.
[* black] Put the tip of the plastic pry barspunger in the edge between the orange and blue plastic and slide upward (see transition from picture 1 to picture 2).
[* black] Put the tip of the plastic pry barspunger in the edge between the orange and blue plastic and slide upward (see transition from picture 1 to picture 2).