Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #9

Edição por Craig Lloyd

Edição aprovada de Craig Lloyd

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift and remove the battery from the iPhone.
[* icon_caution] There should be no resistance. If the battery remains stuck, reheat the iOpener and pry again.
[* icon_note] If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.
[* icon_reminder] When installing the batteryIf your new battery doesn’t have adhesive preinstalled, refer to [guide|107792|this guide] to replace your battery'sthe adhesive strips.
[* icon_reminder] When installing the batteryIf your new battery doesn’t have adhesive preinstalled, refer to [guide|107792|this guide] to replace your battery'sthe adhesive strips.
[* icon_reminder] Perform a [guide|44497|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting.