Alterações no passo nº 3
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* icon_caution] ***Do not*** touch the blue and pink leads above and below the four wires you are de-soldering, respectively, as both wires lead straight to the capacitor. |
|---|---|
| [* black] Carefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp. | |
| [* black] Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers. | |
| [* icon_caution] Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron. | |
| - | [* icon_caution] ***Do not*** touch the pink lead below the four wires you are de-soldering, as this leads straight to the capacitor. |
| [* icon_note] Repeat the process until all four leads are de-soldered. |