Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #15

Edição por Sam Goldheart

Edição aprovada de Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The LCD and Digitizer connectors are on the same cable assembly, so prying the end up should disconnect both connectors. Make sure the cables are fully disconnected before removing the display.
[* black] Pry up on the end of the LCD/Digitizer cable to disconnect both connectors.
[* icon_caution] When reassembling your phone, The LCD cable may pop off the connector. This can cause white lines, or nothing at all to appear when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado