Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #12

Edição por Matt Zieminski

Edição aprovada de Matt Zieminski

Sem alteração

Linhas de Passo

[* black] Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:
[* red] Two 1.3 mm screws
[* orange] One 1.7 mm screw
[* yellow] One 3.25 mm screw
[* icon_caution] It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 1.3 mm screw or one of the 1.7 mm screws in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.
[* icon_caution] Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size, don't force them.