Conserte seus objetos Comunidade Loja

Alterações no passo nº 14

Edição por Reed Crosby —

Edição aprovada por Reed Crosby

Antes
Depois
Sem alteração

Linhas do passo

-[* black] With a screwdriver, loosen the four screws.
-[* black] Loosen each screw a little bit, going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
-[* icon_caution] Loosening one screw without the other screws may damage the logic board.
+[title] Heatsink Unscrewing
+[* red] With a Phillips screwdriver, remove the 4 screws on the heatsink, in order of the numbers of the metal.
+ [* icon_caution] Loosening the screws out of order can be damaging.