Skip to main content

Alterações no passo #3

Edição por Nicolas Siemsen

Edição aprovada by Nicolas Siemsen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Loosen this ground connection. You will need to remove the turn signal to reach the nut on the back of the bolt that holds those ground wires. For guidance on removing the turn signal [guide|20583|click here to review the turn signal bulb replacement guide.]
[* red] Loosen this ground connection. You will need to remove the turn signal to reach the nut on the back of the bolt that holds those ground wires. For guidance on removing the turn signal [guide|20583|click here to review the turn signal bulb replacement guide.]
[* black] Just as you did for the main battery ground clean the area where these wires connect to the chassis.