Skip to main content

Alterações no passo #3

Edição por Nicolas Siemsen

Edição aprovada by Nicolas Siemsen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackred] Loosen this ground connection. You will need to remove the turn signal to reach the nut on the back of the bolt that holds those ground wires.
[* blackred] Loosen this ground connection. You will need to remove the turn signal to reach the nut on the back of the bolt that holds those ground wires.
[* black] Just as you did for the main battery ground clean the area where these wires connect to the chassis.

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Nenhuma imagem anterior

Adicionado