Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por Sam Goldheart

Edição aprovada de Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case.
[* black] Remove the ringer switch.
[*[* icon_reminder] Note the orientation for reassembly: The red line should be up, and when you're fittingat the switch bracket back ontotop of the switch, ensurebutton. The notch in the back of the ringer switch and actuator arebutton should be in the same position as, and connectedmate with, the mechanical switch on the cable.
[*[* icon_reminder] Note the orientation for reassembly: The red line should be up, and when you're fittingat the switch bracket back ontotop of the switch, ensurebutton. The notch in the back of the ringer switch and actuator arebutton should be in the same position as, and connectedmate with, the mechanical switch on the cable.