Alterações no passo nº 8
Edição por midiman127 —
Edição aprovada por midiman127
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Cut the side of the plastic wrapping of the new LCD. Slide it out of the plastic bag directly into position. Make sure you don't touch surface with your fingers. |
|---|---|
| + | [* black] There are 2 tabs (red) the new LCD needs to slide under. |
| + | [* black] Now place the clear plastic plate on top of the new display. MAKE SURE it is in the correct orientation. In the image the BLUE notch is a bit smaller than the orange one. |
| + | [* black] Press the edges of the plastic lightly and it will snap into the case. |
| + | [* black] Remove the rubber band gently from the old LCD and place it into the groove (image 3, red). Make sure it is aligned correctly. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado