Alterações no passo nº 6
Edição por midiman127 —
Edição aprovada por midiman127
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Gently pull flat band out of the circuit board mount. You might use the pliers but don't bend the band. |
|---|---|
| + | [title] Access LCD Circuit Board |
| + | [* icon_caution] Gently pull flat band out of the circuit board mount. You might use the pliers but don't bend the band. |
| [* black] Move the 3 wires out from the gap between the casing and circuit board. | |
| [* black] First: White | |
| [* black] Second: Orange | |
| [* black] Third: Black. This is the one we need to free. | |
| [* black] Now the back casing with circuit board should come lose. Only attached by the black wire. | |
| [* black] Also pull out the 2 metal mounting plates. |