Alterações no passo nº 4
Edição por midiman127 —
Edição aprovada por midiman127
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] READ THIS!!!! This is not a "the bigger the hammer the smaller the problem" step. You mess this up and you will need to duck-tape your flash back together. Also...: make sure you don't snap a plastic tool. |
|---|---|
| + | [title] Pry open Case |
| + | [* icon_caution] READ THIS!!!! This is not a "the bigger the hammer the smaller the problem" step. You mess this up and you will need to duck-tape your flash back together. Also...: make sure you don't snap a plastic tool. |
| [* black] Looking flat into the opening you should see a metal part far in. | |
| [* black] With a flat driver try to get between the plastic casing and this metal part to pry it out of the locking notch. | |
| [* black] Image 3 illustrates the metal tab you need to press down for the side to open. | |
| [* black] One more time: Make sure you are getting between the casing and the metal tab. Twisting the drive worked for me after a few tries. |