Alterações no passo nº 7
Edição por Daniel Hodges —
Edição aprovada por Daniel Hodges
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] With a Phillips #1 screwdriver, remove four 3mm screws from the silver metal circuit board. | |
| + | [* icon_caution] When moving the board, wires will still be attached; be careful not to stretch the wires. |
| [* black] Remove and place the metal circuit board to the side. | |
| - | [* icon_caution] When removing the board, wires will still be attached. Place the board to the side while being careful not to stretch the wires. |