Conserte seus objetos Comunidade Loja

Alterações no passo nº 7

Edição por Jonathan Oyan —

Edição aprovada por Jonathan Oyan

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Insert the plastic opening tool into the top of the rear panel to separate the 2 pieces of the rear panel.
-[* black] Firmly slide the plastic opening tool all around the rear panel. The 2 pieces of the rear panel are attached with snaps.
+[* black] Insert the plastic opening tool into the groove at the top of the rear panel.
+[* black] Firmly slide the plastic opening tool all around the rear panel. The panel will audibly snap as it comes apart.
[* icon_note] These 2 pieces are attached well, so a significant amount of force is needed to separate them.