Ir para o conteúdo principal

Alterações no passo #6

Edição por iRobot

Edição aprovada por iRobot

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Lay your jacket out, holding it to full length but not stretched. Measure from the top of the collar to waist.
+[* black] [[Sewing Glossary#Section_Measuring_Tape|Measure]] the same length on your zipper from the zipper stop up. Mark this with tailor’s chalk.
+[* black] Measure two inches above that line and make a second mark with your tailor’s chalk.
+[* black] Cut the zipper at the first mark you made. Be sure to cut between the teeth of the zipper to preserve your scissors.
+[* icon_caution] Be sure that the zipper slider is below your first mark so you don't cut it off!

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado