Alterações no passo nº 1
Linhas do passo
| [* black] Place the camera so that the lens would be facing down. Use the phillips head screwdriver to remove the small silver screw in the top right corner. | |
| [* black] Gently peel back the black adhesive tape from the top edge. | |
| [* icon_caution] The tape is attached to the ribbon cable. Be very careful not to tear or damage the ribbon cable when removing the tape. | |
| [* black] Use the plastic opening tool to pry the black locking tab up. | |
| + | [* black] Gently remove the ribbon cable from the connector |