Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Griffin Paul —

Edição aprovada por Griffin Paul

Antes
Depois
Sem alteração

Linhas do passo

-[* icon_note] Before you begin, be sure you have all parts and tools needed for the dish assembly. Also, the Reflective Dish is quite large, so make sure your construction area is at least two meters in diameter.
-[* black] Lay two triangular sections side-by-side, with pointed edges and bases adjacent to each other.
-[* icon_note] Since the sections and completed dish are not flat, it is advisable to prop one end up on a box or similar object to give more stability during the assembly process.
+[* icon_note] Before you begin, be sure you have all parts and tools needed for assembly and a construction area that is at least two meters in diameter.
+[* red] Lay two triangular sections side-by-side, with pointed edges and bases adjacent to each other. ***(Need a photo of side-by-side panels)***
+[* icon_note] Since the sections are not flat, it is advisable to prop one end up on a box or similar object to give more stability during assembly. ***(Need a photo of them propped up)***