Alterações no passo nº 1
Edição por Kurt Zeller —
Edição aprovada por Kurt Zeller
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Slide a 14 mm screw through the inside of each tripod leg and the center plate securing each with a nut on the other side. |
|---|---|
| - | [* icon_note] Be sure the flat convex side of each tripod leg is facing downward to the ground. |
| + | [* black] Slide a 14 mm screw through each tripod leg and the center plate. |
| + | [* icon_note] Be sure the flat side of each tripod leg is facing toward the ground. |
| + | [* black] Secure each screw with a nut on the other side of the center plate. |