Pular para o conteúdo principal

Alterações no passo #10

Edição por Eli

Edição aprovada por Eli

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Lastly, if you need to detach the inside handle cable from the actuator, you just need to pop the door open on the side of the housing.
[* blue] The blue cable end can just slide out of those groovesbe pulled straight up from the place holders it sits in.
[* blackorange] The actual cable is just hooked on the end and can be taken off pretty easily.
[* blue] The blue cable end can just slide out of those groovesbe pulled straight up from the place holders it sits in.
[* blackorange] The actual cable is just hooked on the end and can be taken off pretty easily.
[* black] In order to put the locking mechanism back, just follow these directions in reverse order.
[* black] When putting the actuator back in, slotting the blue cap in the right grooves can be a little tricky when it's inside the door so I advise doing it once or twice while it's outside to get the feel for it.

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão