Pular para o conteúdo principal

Alterações no passo #2

Edição por Jem

Edição aprovada por Jem

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Fold the rubber grommet, which is located on the left top side of the door panel, then push it into the inside of the hole in order to put the cable to the inside of the door panel.
[* red] Fold the rubber grommet, which is located on the left top side of the door panel, then push it into the inside of the hole in order to put the cable to the inside of the door panel.
[* blue] Peel out the rubber, which holds the door lock, from the door panel.