Alterações no passo nº 7
Edição por Bradley —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] With the screws removed, we have to get rid of this small metal plate. Removing this plate can be a bit tricky so don't get discouraged/frustrated. | |
| - | [* black] At this point we'll have to lift the logic board up to pull the plate out. |
| - | [* icon_caution] |
| + | [* black] At this point, we'll have to lift the logic board up to pull the plate out. |
| + | [* icon_caution] With one hand, gently slide the top left end of the board up and out of the device. |
| [* yellow] With your other hand, pull the plate out until the tab comes out of the device. | |
| - | [* black] Once the tab is pulled out from the bottom |
| + | [* black] Once the tab is pulled out from the bottom, slide the metal plate down and out from the device. |