Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Walter Galan

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Carefully lift the logic board off the heat sink.
[* icon_note] If the two components appear stuck together, carefully pry them apart with the flat end of a spudger, being careful not to disturb any surface-mount components on the logic board.
[* icon_cautionicon_reminder] Make sure to apply a new layer of thermal paste before reattaching the heat sink. Our [guide|744|thermal paste guide] makes it easy.
[* icon_cautionicon_reminder] Make sure to apply a new layer of thermal paste before reattaching the heat sink. Our [guide|744|thermal paste guide] makes it easy.