Alterações no passo #2

Edição por Nathan Balcom

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Gently separate the top of LCD from the rest of the camera using your thumb.
[* icon_caution] Be careful not pull the LCD too far because of the ribbon cable connection.
[* blackblue] Place the Spudger in the hole of the electrical ribbon.
[* blackblue] Place the Spudger in the hole of the electrical ribbon.
[* black] Gently pull the ribbon down using the Spudger until it is free from the camera but still connected to the LCD.
[* icon_note] The LCD will still be connected to the rest of the camera