Alterações no passo #2

Edição por Nathan Balcom

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Gently separate top of LCD from the rest of the camera.
[* black]
Then Place the Spudger in the hole in the electrical ribbon. Gently pull the ribbon down until the ribbon is free from the camera but still connected to the LCD.
[* icon_caution] Gently separate top of LCD from the rest of the camera.
[* black]
Then Place the Spudger in the hole in the electrical ribbon. Gently pull the ribbon down until the ribbon is free from the camera but still connected to the LCD.