Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Nathan Balcom

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] Gently separate top of LCD from the rest of the camera. Then Place the SpludgerSpudger in the hole in the electrical ribbon. Gently pull the ribbon down until the ribbon is free from the camera but still connected to the LCD.
[* icon_caution] Gently separate top of LCD from the rest of the camera. Then Place the SpludgerSpudger in the hole in the electrical ribbon. Gently pull the ribbon down until the ribbon is free from the camera but still connected to the LCD.