Alterações no passo nº 2
Edição por Josh Yacktman —
Edição aprovada por Josh Yacktman
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] To separate the shell halves there are two options: | |
| - | [* black] 1. Use an opening pick and insert it between the IR sensor and other stuff halve prying them apart |
| - | [* black] 2. push up on the rail towards the shell halve being removed (be careful as there is a ribbon cable connecting the rail to the halve we’re separating from |
| - | [* black] With the shell halves separated, carefully put the side with the rail next to the other halve making sure not to hurt the ribbon cable |
| + | [* black] 1. Use an opening pick and insert it between the IR sensor and other half carefully prying them apart |
| + | [* black] 2. push up on the rail towards the shell halve not attached to the IR sensor |
| + | [* black] With the shell halves separated, carefully put the side with the rail next to the other half |
| + | [* icon_caution] There are two ribbon cables connecting the half with the rail to the other side |